RD24-6M Barrier Gate Radar Sensor For Parking Lot Anti Smashing

Barrier radar sensors are advanced devices used in automated access control systems to detect the presence and movement of vehicles, ensuring the smooth operation of barrier gates.

• Precise Detection: Accurately detects vehicles, ensuring timely activation of barrier gates
• Weather Resistance: Functions reliably in various weather conditions including rain, snow, fog, and bright sunlight
• Non-Contact Sensing: Minimizes risk of damage to both sensor and vehicles
• Customizable Range: Detection range adjustable from 1-6 meters to suit specific location needs
• Real-Time Monitoring: Continuously monitors vehicle movements and adjusts barrier operations
• Reduced False Alarms: Less prone to false alarms caused by environmental factors
• Swift Response: Quick response times facilitate rapid opening and closing of barrier gates
• Integration: Seamlessly integrates into existing access control systems
• Enhanced Security: Reliable vehicle detection helps prevent unauthorized access
• Cost-Effectiveness: Long-term cost savings due to durability and low maintenance
• Improved Traffic Flow: Optimizes vehicle management and reduces congestion
• Versatility: Compatible with various types of barrier gates

1. Choose Power Adapter: Select a power adapter with output of 9-24VDC 1A for independent power supply
2. Power Supply from Brake Controller: Ensure output current is not less than 200mA when using brake controller
3. Installation Height: For lanes, optimal height between radar center and ground is 50-60cm
4. Distance from Fence: Center of radar to fence pole should not be less than 25cm (octagonal) or 30cm (right-angle)
5. Installation Orientation: Install perpendicular to horizontal plane and fix securely
6. Detection Range Surface: Ground within detection range should be flat without obstacles

1. Enter the Menu: Press and hold function key until desired menu number is selected, then release
2. Amend Parameters: Click function key to change current parameter
3. Save Parameters: Press and hold function key until red indicator lights 1, 2, and 3 flash simultaneously, then release

1. Set application scene to straight rod mode (Menu6)
2. Set detection distance (Menu1)

1. Set application scenario to fence mode (Menu6)
2. Set detection distance (Menu1)
3. Set gate closing speed (Menu3)

1. Set application scenario to trigger mode (Menu6)
2. Set detection distance (Menu1)
3. Set reply output method (Menu5)

• Sensitivity Setting: For electric vehicles - middle or low; for pedestrian passageways - middle or high
• Pedestrian and Vehicle Distinction: Set "No distinction" in non-necessary situations to prevent gate closing accidents
• Relay Output Delay: In trigger mode, delay set to 0 = vehicle presence output; otherwise = pulse output (1-6 seconds)

• Radar Triggered by Fence: Check installation distance and orientation, adjust position or add spacer, verify settings
• Radar Output Not Reset: Check set distance, ground obstacles, installation orientation, or perform radar initialization
• Three Lights Always On: Return to factory for inspection if initialization unsuccessful
• Green Light 1 and 3 Flashing: Safety mechanism to prevent car rear smashing - no action required